The soft bag we often call belongs to the traditional soft bag. It was made the earliest and most popular. The low and high grades are also very clear. The simple ones can be cut directly on the construction site to cover the sponge on the wall. The complicated ones require a woodworking engraving machine for the bottom plate. Chamfering of cutting spray foam. The product itself is also divided into three layers. There are many types of plates for the first layer, which can be divided into four major categories: density board, multilayer board, fiberboard, and pvc (chevron board). The board itself has high and low products. The second layer is our common sponge. Generally, the sponge produced is 2.5 cm or 3 cm thick. The top layer is leather. Because it is covered by hand, the leather can be diversified, such as genuine leather, super fiber, and pvc. Pu can be used, so the level of leather is also obvious. The high and low use of materials obviously makes the prices of products on the market vary greatly.

Hard Pack

The hard bag product is a simplified version of the soft bag, but there are not many things inside. Our common hard bag is generally carved by woodworking engraving machine or cut manually. It can be directly covered with leather material or sucked. Plastic treatment coating. Of course, the quality and price are different. Inkjet printing on the leather and then covering the hard bag, which is usually printed hard bag. Inlaid hard bag on the hard bag, we call it inlaid hard bag. It can also be embroidered on leather and then covered. It is the embroidered hard bag!

Relief

Relief is a kind of leather sculpture, but there is a reason. It is machine embroidery on the back of the leather with sponge. After the embroidery is completed, it is covered with plastic as if it is a hard bag. You can also cut flowers (cutting is to cut the surface of the leather to leak out the inner sponge), you can also do the inner side with lights, double-layer lamination, etc.! The steps for the inner side with light are to first transmit light, then close the edge, fix the light strip, and leave the seam at the end.

Carved

Jingdiao is just one word, all products must be customized, and the shape and size must be customized according to the actual size. The craftsmanship is to carve out the shape first, and then blister the leather. Because the product has high requirements for three-dimensional perception, there are also requirements for the elasticity of leather. There are even double layers in the process. Because of the high requirements for complex production processes, the market is full of high-end products.

There are two ways to install the product: Velcro and traditional installation, focusing on traditional installation

The problem of installation is simple and not complicated at all, but if you have never been exposed to woodworking, it is recommended not to install it.

The first step is to ensure that there are no steel nails at the level of the background wall (usually 0.9 multi-layer boards with 2.0 steel nails)

The second step is to measure the size of the wall, mark the installation route of the soft bag, use infrared light best, and then go to the wall. Pay attention to the opening of the electrical jack

third step. If the product is small, you can use a mosquito nail gun to fix the nail holes. If there is no problem, you can use 30 nails. If the product is large, you must apply glue on the back. The choice of glue can be glass glue. Glue can be used. The glue is applied to the place that is easy to warp or bears force, and then fix it with an air nail gun

Step 4: After installation, check whether there are any nail holes in the obvious position. Use glue to close it. Use a plug knife to deal with the uneven edges that leaked outside.

Soft bag and hard bag are an indispensable part of the background wall in the soft decoration industry. It is a classic material that reflects the high, cold and warm colors of the decoration field